DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free SPOTO CCIE RS TEST-Section 1.3 Spanning Tree


today I'll share some SPOTO CCIE RS DUMPS FOR YOU

Section 1.3 Spanning Tree

Configure the ACME network as per the following requirements

l Assign all active odd vlans to instance 1

l Assign all active even vlans to instance 2

l Ensure that sw1、sw3 is the primary root bridge for odd vlans

l Ensure that sw1、sw3 is the secondly root for even vlans

l Ensure that sw2、sw4 is the primary root bridge for even vlans

l Ensure that sw2、sw4 is the secondly root for odd vlans

l explicitly configure the root and backup roles, assuming that other switches with
default configuration may eventually be added in the network in the future

l all access ports must immediately translation to the forwarding state up on link up and they must still participate in stp. use single command per switch to enable this

l Access ports must automatically shut down if they receive any bpdu and an administrator must still manually re-enable the port. use a single command per switch to enable this feature.

 

Solution:

SW1/SW2

spanning-tree mode mst

spanning-tree mst configuration

 instance 1 vlan 1,15, 23, 35, 57, 67, 999 

 instance 2 vlan 14, 24, 46

 

SW3/SW4 

spanning-tree mode mst

spanning-tree mst configuration

 instance 1 vlan 1,49, 89, 111, 411, 999 

 instance 2 vlan 34, 38, 310

 

SW1/SW3

spanning-tree mst 1 priority 0

spanning-tree mst 2 priority 4096

 

SW2/SW4

spanning-tree mst 1 priority 4096

spanning-tree mst 2 priority 0

 

SW1/SW2/SW3/SW4

spanning-tree portfast default

spanning-tree portfast bpduguard default


Section 1.4 WAN Switching

l The WAN links must rely on a layer 2 protocol that supports link negotiation and authentication.

l The Service provider expects both R18 and R19 to complete three-way handshake by providing the expected response of a challenge that is send by AS 20003 Router.

l R18 must use the username ACME-R18 and password CCIE

l R19 must use the username ACME-R19 and password CCIE

Solution:

R18

interface Serial4/0

 encapsulation ppp

 ppp chap hostname ACME-R18

 ppp chap password CCIE

 

/-- Pay attention to check the username and password on the exam. --/

R19

interface Serial4/0

 encapsulation ppp

 ppp chap hostname ACME-R19

 ppp chap password CCIE


More you may be interested:

Passed CCIE RS Written

Free Download-SPOTO 200-125 CCNA RS Exam Dumps PDF

Can I go CCIE RS exam directly? -The prerequisites of CCIE exam

 

 

Comments:


Start the discussion...


To Leave a Comment or reply to posts please log in